How to Drain an Above Ground Pool: 5 Steps that are Enough to Get a Good Finishing

Ah!! spring is Gone. Or winter is Gone. You might forget winterizing the pool or there are some other reasons that you may drain the whole pool. This content covers the topic of how to drain an above ground pool. So, this may interest you for your query.

Draining!! Interesting to know. In a simple language, just remove the water from the pool. This seems to be a messy or hard job. But don’t worry, not that much hard or rough task, you can do it very easily with proper ways of draining. We will cover all the potential fruitful ways of removing and drying the pool water to make it ready for the fun.

Before starting let’s know about the reasons why you may need the process to do.

Replace the Pool Liner

What do you do if the pool liner is leaked or torn? Do you repair it? Then you need to have proper repair kits and expertise to go underwater to fix the liner. Most of the time it may not go for a longer time and you have to replace the liner. Then it seems that you might spend double to replace it for not replacing it at the first chance. Replacing is a different task; you need to drain the whole pool for this reason.

Fresh New Water

Remember that, if you close the pool or winterize the pool correctly then you won’t need to replace the water. So, there is no need to drain the freshwater of the pool. Only go for replacing if there is anything like stale water and you didn’t care about the pool properly for many days.

Balance the Pool Chemistry

Most of the chemical imbalances may be fixed without draining water. There is some critical imbalance like “chlorine lock”, you can mend this with no process. The more chlorine shock you put, the worse would be the water. The excess usage of pool stabilizer or imbalanced pH level has the only way to be fixed, which is replacing the whole over-treated water with fresh water.

Moving the Pool

Is this possible to move a pool? I don’t think so. If you tend to change your own home then you may have to close the pool if there is nobody to check out the pool and there is no sense to have the pool in that place. Moving a pool means closing the pool forever. Draining is important to close the pool.

Other Reasons

Sometimes in Winter you may need to preserve some things and need some space to store those. A pool is a perfect thing for that. If you don’t need the pool and want to store the pool accessories and other valuables, then drain the pool water. Otherwise, most of the people clean or winterize the pool in the winter or snow season to maintain clarity.

These are several reasons that you may do the whole draining process of a pool sometimes.

How to Drain an Above Ground Pool in 5 Steps

Step 1: Fix Where to Flow Water

It is a crucial fact to find a place to dump the water. There are thousands of gallons of water that you need to drain. So, you have to fix the place where you can dump all the water that is not harmful to anybody.

You may find your yard right but make sure that it would not harm the yard because of the chemicals in the water. Also, take care of the plants that are in the yard.

The best way is to handle the water into a gutter or sewerage system. It needs to know about the city regulations and rules for using the sewerage system. There must be some distinct rules for draining chemical water in the city.

Step 2: Choose the Method

There are several methods that you can use to drain the pool water at your convenience. Among these, there are two methods that draining water of the above ground pool is possible. One is a traditional pool vacuum hose and another is above ground pool Pump.

Garden Hose

The cheap method of draining water is a garden hose but this low-cost method would cost you more time than an electric pump. So you have to take care of the time if you are time-sensitive.

You can use the hose in two ways to cut the hose in both ends to a few feet or may use the whole garden hose. If the plan is to cut off the faucet, make sure it should be 6 to 8 feet long. The more diameters of the hose, the fast-draining can be possible with more water pull off.

Simply submerge the whole hose in the pool water covering one end with a hand. And pull the covered end out of the pool and put that in the faucet. This works best if two people are there to catch one end of the hose to snag water.

One thing that happens with the garden hose that the entire pool is not emptied with it and some very little inch of water may leave in the pool. But this water doesn’t put harm to your pool if no imbalance is left out. You can use the electric pump at the last moment to finish all the water. There, the sand filter and skimmer also may come to use to clean the pool.

Electric Pump

An electric submersible pump is customized to drain all of the water out of the pool. It is a time-efficient and highly expensive way of draining water. It is expensive in another way too because it consumes a huge amount of electricity. The more use of the pump the more cost of electricity.

If you have to move the place, close the pool, replace the liner then you better pump the water out from the pool for complete draining. But still, you can use the hose initially and pump at the final step to minimize the electricity cost.

Step 3: Drain the Water

Now it’s time for the draining activity of the pool. When you choose the hose to drain the required steps are-

  • First, connect one part to the faucet where water flows from.
  • Then put another end of the hose on the pool and submerge it.
  • In this step, turn on the faucet to flow the water.
  • Disjoin the hose from the faucet, turn off the faucet and put the hose where you want to channel out the water.
  • Finally, see the water flow in reverse and start draining the pool.

When you choose the electric pump, there are no steps to be described here as all the processes are operational and instructed. Just read the instructions and run the pump. If you are ready to use the hose in the very first step and finally the pump to finish the draining, it is also possible.

Step 4: Remove the Leftover Water

In terms of the electric pump, you don’t have to do this step as you won’t have any leftover water in the pool. This happens only if you choose the hose to drain the water. There would be a few inches of water in the pool and it is not mandatory to remove all of this if there is no much chemical imbalance.

You can use the pump at the final step to drain the water to the fullest after the hose usage. Another way for the cheapest trick is to drain out the water by hand with a bucket and it is time-consuming and distressing too.

Step 5: Dry Out the Pool

The final step is to dry out the pool if you plan to replace the pool liner or move the pool. Drying out is a very important task whatever you, because without drying up the pool you may suffer pool algae or other organisms. It would cause great harm to health. Moreover, it would increase more work for you later in the process of moving the pool or replacing the liner.

In case of drying the pool use a dry vacuum to dry up the pool. Additionally, you can leave the pool outside in the sun or air-dry the pool till it becomes dry to the touch.

Let’s get the help of the whole process of hose from this video I hope this can help-

Bottom Lines for How to Drain an Above Ground Pool

If you are tight on a budget but want to have the pool draining correctly then approach the pool hose process. It would provide you with the best way of draining service at a low cost. In terms of replacing a pool liner, you have to remember about drying out the pool otherwise the pool liner would go for no help.

Finally the people with less time and with a flexible budget can use the electric pump to drain out the water. There would be no water left after removing the pool water and pool draining would go for the best finishing.

If you have any query just contact us, we are always ready to fulfil our users’ asks.